The suspension structure for the "METALWALL" Semi-Frame System (Integrated ceiling system) consists of metal ceiling panels resting on top of exposed bearer beams (runners) which are installed parallel to each other to form continuous runs. Produced on advanced manufacturing equipment, the high quality precision engineered panels are flat and dimensionally stable. The flange at the end of the ceiling panels rests on top of the bearer beam profile. They are available with square edges and can be fitted with an optional gasket to reduce vibration noiseand control air leakage. The ceiling panels are made of aluminium or steel, perforated or non-perforated, and available in colours according to RAL or to special order.
The SF System comprises of three main elements; the suspension (including the distance profile), the exposed bearer beam and the ceiling panels.
- Cost effective metal ceiling system
- Quick to install metal ceiling system
- Choice of patterns and colours
- Optional Gasket to reduce vibration
- Excellent sound absorption and attenuation
- Fully accessible and easy to dismantle
- Choice of panel material thickness
- No stabiliser bar required
Note: For Model Reference, please refer to page 13 of the Product Reference Handbook
The suspension elements or threaded rod is fixed directly to the structural slab with anchored Z-bracket. The length to be adjusted according to suspension height elected. To permit fine alignment of position along its length, the hangers are fixed to a rigid hanger bracket that slips inside the exposed bearer beam profile to form uninterrupted and parallel main runs. Panels can then be located and installed into place by resting the flanges onto the bearer beams to complete the installation.